 ULINK®2 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
ULINK®2 User's Guide
Introduction Hardware Description Setting Up ULINK2
Connecting ULINK2 Installing Drivers Configuring µVision ARM7/ARM9 Debugging Debug Driver Configuration USB-JTAG Adapter JTAG Device Chain Debug Cortex-M Debugging Debug Driver Configuration USB-JTAG/SWD Adapter JTAG/SW Device Debug Trace Configuration Trace Port Timestamps PC Sampling Trace Events ITM Stimulus Ports Flash Download Configuration Download Function RAM for Algorithm Programming Algorithm Supplied Algorithms Analog Devices AMD Atmel Intel Luminary Micro Macronics NXP (founded by Philips) OKI SST STMicroelectronics Toshiba TI Adding New Algorithms Using ULINK2 Real-Time Trace Real-Time Agent Evaluation BoardsDebug Driver Configuration
Use the Options for Target toolbar button and click the Debug tab to display the Debug dialog.
µVision uses a target driver to connect to and control Flash downloading and debugging. For debugging, select the target driver from the Use: section of the Options for Target — Debug dialog.
Select the ULINK Cortex Debugger driver for the Cortex-M target hardware.
Note
- The ULINK2 adapter uses the same drivers as the ULINK adapter, and requires the following product versions or higher:
- MDK-ARM — V3.04
- C166 — V6.06
- C51 — V8.06
Check the Load Application at Startup and Run to main() options to load your application and execute code up to the first executable statement of your main() function when the debugger starts.
Connect the ULINK2 adapter to your PC, then click the Settings button to display the Target Driver Setup dialog.
The Target Driver Setup dialog is composed of three groups of information and configuration settings:
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
