 ULINK®2 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
ULINK®2 User's Guide
Introduction Hardware Description Setting Up ULINK2
Connecting ULINK2 Installing Drivers Configuring µVision ARM7/ARM9 Debugging Debug Driver Configuration USB-JTAG Adapter JTAG Device Chain Debug Cortex-M Debugging Debug Driver Configuration USB-JTAG/SWD Adapter JTAG/SW Device Debug Trace Configuration Trace Port Timestamps PC Sampling Trace Events ITM Stimulus Ports Flash Download Configuration Download Function RAM for Algorithm Programming Algorithm Supplied Algorithms Analog Devices AMD Atmel Intel Luminary Micro Macronics NXP (founded by Philips) OKI SST STMicroelectronics Toshiba TI Adding New Algorithms Using ULINK2 Real-Time Trace Real-Time Agent Evaluation BoardsDownload Function
The Download Function section of the Flash Download Setup dialog defines the Flash operations that will take place when the target device is downloaded (Flash — Download).
One of the Erase functions must be selected:
- Erase Full Chip erases all Flash memory on the device prior to program download.
- Erase Sectors erases only the sectors used by the program to be downloaded.
- Do Not Erase No Flash is erased.
Choose from the Program functions to:
- Program Flash ROM with the current µVision project program file.
- Verify that the contents of Flash ROM match the current µVision project program file.
- Reset and Run your program after downloading and verification complete.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
