Atmel SAM3S-EK

This kit lets designers quickly evaluate and develop code for applications running on Atmel SAM3S microcontrollers. The board features the SAM3S4C chip in LQFP100 package with optional socket footprint, a 12 MHz crystal, a 32.768 KHz crystal, an optional SMB connector for external system clock input, NAND Flash, 2.8 inch TFT color LCD display with touch panel and backlight, a UART port with level shifter circuit, a USART port with level shifter circuit multiplexed with RS485 port with level shifter circuit, microphone input and mono/stereo headphone jack output, an SD/MMC interface, a reset button, user buttons: Left and Right, QTouch® buttons for  Up, Down, Left, Right, Valid and Slider, one full-speed USB device port, one JTAG/ICE port, on-board power regulation, BNC connector for ADC input, BNC connector for DAC output, a user potentiometer connected to the ADC input and a ZigBee® connector.

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4678&category_id=163&family_id=605&subfamily_id=2127

Supported Devices

Use the feedback form to tell us about other boards or vendors that should be listed.