NXP (founded by Philips) LPC2194

The NXP (founded by Philips) LPC2194 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 256KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 16KB RAM, Vectored Interrupt Controller, Two UARTs, I2C serial interface, 2 SPI serial interfaces Two timers (7 capture/compare channels), PWM unit with up to 6 PWM outputs, 4-channels 10bit ADC, 4 CAN channels. Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Development Tools Compiler, Assembler, Linker, Debugger MDK-ARM (Microcontroller Development Kit) Keil MDK-Lite Download Keil Evaluation Boards MCB2100 Keil JTAG Debuggers ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller Data Sheets Data Sheet 169,513 bytes User Manual 1,685,967 bytes Application Notes LPC2000 Application Notes NXP (Founded by Philips) Header Files LPC21XX.H 21,925 bytes Example Code CAN Examples for Philips LPC2000 series LPC2100 Insider's Guide Example Programs LPC2104/05/06 Watchdog Example Nesting Interrupt (irq) Functions on MCB2100 with CARM Philips LPC2000 PWM Example Philips LPC2100 Blinky Example Philips LPC2100 Blinky IRQ Example Using Interrupt EINT1 on Keil MCB2100 Board FLASH Utilities FLASHER Bluewind FLASHit hse Electronic ULINK-ME Keil ULINK2 Keil ULINKPro Keil LPC2000 Flash ISP Utility NXP (Founded by Philips) J-Link ARM SEGGER Microcontroller Device Programmers Dataman 48Pro2 Super Fast Universal ISP Programmer Dataman Programmers Ltd. Dataman 48Pro2C Super Fast Universal ISP Programmer Dataman Programmers Ltd. Dataman 848Pro2 Super Fast Stand-Alone Programmer Dataman Programmers Ltd.

MDK Middleware The following middleware components are pre-configured in MDK-Professional CAN Driver Keil Real-Time OS RTX Real-Time Operating System Keil Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (4-Channels) CAN External Interrupts GPIO Port 0 (30 bits) GPIO Port 1 (16 bits) I²C Interface IAP Flash Memory Programming Memory Accelerator Module Memory Mapping Control Phase Locked Loop Pin Connect Block Power Control Pulse Width Modulator Real Time Clock SPI Interface 0 SPI Interface 1 System Clock Timer 0 Timer 1 UART 0 UART 1 Vectored Interrupt Controller VPB Divider Watchdog Timer The following on-chip peripherals are not simulated. XCLK Output