NXP (founded by Philips) LPC2220

The NXP (founded by Philips) LPC2220 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 64KB RAM, Vectored Interrupt Controller, External Bus Controller, Two UARTs, I2C serial interface, 2 SPI serial interfaces, SSP Interface, Two timers (7 capture/compare channels), PWM unit with up to 6 PWM outputs, 8-channels 10bit ADC, Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Development Tools Compiler, Assembler, Linker, Debugger MDK-ARM (Microcontroller Development Kit) Keil MDK-Lite Download Keil Evaluation Boards 05. phyCORE-ARM7/LPC2294 System on Module Phytec JTAG Debuggers ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller Data Sheets Data Sheet 273,671 bytes User Manual 1,440,925 bytes Application Notes LPC2000 Application Notes NXP (Founded by Philips) Header Files LPC22XX.H 23,232 bytes Example Code LPC2104/05/06 Watchdog Example FLASH Utilities FLASHER Bluewind FLASHit hse Electronic ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller

Real-Time OS RTX Real-Time Operating System Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. External Interrupts GPIO (32-Bits) Phase Locked Loop Pin Connect Block Power Control Pulse Width Modulator Real Time Clock SPI Interface System Clock Timer 0 Timer 1 UART 0 UART 1 Vectored Interrupt Controller VPB Divider Watchdog Timer The following on-chip peripherals are not simulated. Flash Memory I²C Interface Memory Accelerator Module Memory Mapping Control