Infineon XC824MT-1F

The Infineon XC824MT-1F is an 8051 compatible microcontroller with dual DPTR, 4 KByte on-chip Program Flash ROM, 256 byte on-chip RAM, 256 byte on-chip XRAM, 8 KByte Boot ROM, High-Speed Synchronous Serial Interface (SSC), Multiplication/ Division Unit (MDU), 3 Timers/Counters, 1 UART, Watchdog (WDT), 4 channel 10-bit A/D Converter (ADC), 1 Capture & Compare Unit 6 (CCU6), 1 Inter-IC Bus (IIC), Realtime Clock (RTC), 48MHz On-Chip Oscillator, 14 interrupts / 4 priority levels, On-Chip Debug Support Unit (OCDS), Device Access Port (DAP) & Single Pin DAP module (SPD), Brownout detection and LED and Touch-Sense controll unit (LED&TSCU).

Development Tools Compiler, Assembler, Linker, Debugger CA51 Compiler Kit Keil PK51 Professional Developer's Kit Keil JTAG Debuggers DAP miniWiggler Infineon Data Sheets User's Manual 1,395,463 bytes XC800 Instruction Set Manual 1,506,317 bytes Header Files XC824.H 30,559 bytes Emulators iC1000 PowerEmulator iSystem MetaICE-XF 8051 In-Circuit Emulator Metalink Corporation FLASH Utilities DAP miniWiggler Infineon

Real-Time OS RTX51 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. Proteus VSM Labcenter Electronics 8051 State Machine MEBA I²C Simulation MEBA LCD Simulation (HD44780 Controller) MEBA LED simulation MEBA Signal Generator MEBA AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil ISD51 Driver Keil Keil MON51/FlashMON Driver Keil