Infineon XC2263N-16F

The Infineon XC2263N-16F is a Microcontroller built around the synthesizable C166SV2 Core with 2K Bytes Dual-port RAM for Register Sets and System Stack, 8K Bytes stand-by RAM (SBRAM), 4K Bytes data RAM (DSRAM), 4K Bytes program/data RAM (PSRAM), 64K Bytes Program Flash, 64K Bytes Data Flash, Memory Protection Unit (MPU), Intelligent On-chip Peripheral Subsystems, Interrupt System with 16 levels and 96 INT-Sources, 2 10-Bit ADC Units with 16 channels, 16 Channel Capture Compare Unit (CC2), 2 Capture Compare Units 6 (CCU60 and CCU61), 1 General Purpose Timer Unit (GPT12E) 2 Universal Serial Interface Channel Modules (USIC0 and USIC1) with 4 serial communication channels, 1 MultiCAN module with 1 CAN node and 64 message objects depth, 76 GPIOs, On-Chip Debug and Emulation Control Block.

Development Tools Compiler, Assembler, Linker, Debugger CA166 Compiler Kit Keil PK166 Professional Developer's Kit Keil JTAG Debuggers DAP miniWiggler Infineon ULINK2 Keil Data Sheets Data Sheet 1,751,807 bytes Instruction Set Manual 5,532,154 bytes Peripheral Units User's Manual 5,286,024 bytes Programmer's Guide 2,204,728 bytes System Units User's Manual 4,902,800 bytes Application Notes C167 DC Motor Speed Control Hitex Header Files XC2263N.H 359 bytes FLASH Utilities DAP miniWiggler Infineon ULINK2 Keil

Real-Time OS Advanced RTX166 Real-Time Kernel Keil RTX166 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (16 channels) Asynchronous/Synchronous Serial Interface ASC0 Capture/Compare Unit CAPCOM1 with T0 and T1 Capture/Compare Unit CAPCOM2 with T7 and T8 (P1H.4-7 Inputs Only) Clock Managment with PLL (Without Decimal Factors) CPU with System Configuration High-Speed Synchronous Serial interface SSC Interrupts NMI PEC Port 0 (2 x 8-bit I/O) Port 1 (2 x 8-bit I/O) Port 2 (16-bit I/O with Open Drain) Port 3 (15-bit I/O with Open Drain) Port 4 (8-bit I/O) Port 5 (16-bit Input) Port 6 (8-bit I/O with Open Drain) Port 7 (8-bit I/O with Open Drain) Port 8 (8-bit I/O with Open Drain) PWM (4 channels) Reset Configuration Timer Block GPT1 (T2, T3, T4) Timer Block GPT2 (T5, T6) Traps Watchdog Timer AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil MON166 Driver Keil