Toshiba TMPM324F10FG

The Toshiba TMPM324F10FG is an ARM Cortex-M3 processor - 48MHz Max. operating frequency - On-Chip debugging (SWD, ETM) - Standby function - modes: IDLE2, IDLE1, SLEEP, STOP - Sub clock operation (32.768 kHz) modes: SLOW - Backup mode (partial shut-off): BACKUP SLEEP, BACKUP STOP - High-speed interrupt response - 1024 kB On-chip Flash ROM - 64 kB On-chip RAM Memory Controller - Expandable up to 16 Mbytes - 16-bit width external data bus - Chip select, wait controller: 4 channel DMA controller: 2 channels 16-bit timer: 16 channels - 16-bit interval timer mode - 16-bit event counter mode - Input capture function - 16-bit PPG output (4-phase synchronous output supported) Real-time clock (RTC): 1 channel - Clock (hours, minutes and seconds) - Calendar (month, week, date and leap year) - Alarm output - Alarm interrupt Watchdog timer: 1 channel - Watchdog time-out function General-purpose serial interface: 12 channel - UART or synchronous mode Serial bus interface: 5 channels - I2C bus or clock synchronous mode Synchronous serial bus interface (SSP): 1 channel - SPI, SSI and Microwire formats USB host controller: 1 channel - USB v2.0 compliant - OpenHCI Release 1.0a compliant - 12 Mbps (Full-speed) CAN Controller: 1 channel - Supports CAN version 2.0B - 32 mailboxes - bus band rate : Up to 1Mbps CEC: 1 channel - Transmit/receive on a byte-by-byte basis Remote control signal preprocessor: 2 channels - Can receive up to 72 bits at a time. 10-bit AD converter: 16 channels - Start by internal timer trigger or external trigger - Fixed-channel mode, scan mode - Single mode, repeat mode - AD monitoring function: 2 channels Backup module - Reduces power consumption by shutting off device parts Interrupts - 84 internal, 15 external - 7 priority levels Input/output ports - 118 pins: 102 input/output + 16 input-only Clock generator - On-chip PLL (4x) - Clock gearing: high-freq. clock divided by 1, 2, 4 or 8.