Infineon XC2237M-56F

The Infineon XC2237M-56F is a Microcontroller built around the synthesizable C166SV2 Core with 2K Bytes Dual-port RAM for Register Sets and System Stack, 8K Bytes stand-by RAM (SBRAM), 16K Bytes data RAM (DSRAM), 32K Bytes program/data RAM (PSRAM), 384K Bytes Program Flash, 64K Bytes Data Flash, 8 DMA Channels, External Bus Interface (EBI), Intelligent On-chip Peripheral Subsystems, Serial interfaces: 6xSPI LIN UART IIC and IIS, 2 ADC Units with 12-bit resolution and 9 channels, 1 MultiCan Unit with 6 channels and 256 Message Objects depth, 2 Universal Serial Interface Channels (USIC), 2 Enhanced Capture Compare Units (CCU6), 1 General Purpose Capture Compare Unit (CAPCOM2), 17 Timer/Counter, 38 digital I/O Lines, Up to 22 Timed I/O Pins (PWM-Ch, CAPCOM), Debug and Emulation Control Blocks.

Development Tools Compiler, Assembler, Linker, Debugger CA166 Compiler Kit Keil PK166 Professional Developer's Kit Keil JTAG Debuggers DAP miniWiggler Infineon ULINK2 Keil Data Sheets Instruction Set Manual 5,532,154 bytes Peripheral Units User's Manual 5,286,024 bytes Programmer's Guide 2,204,728 bytes System Units User's Manual 4,902,800 bytes Application Notes C167 DC Motor Speed Control Hitex Header Files XC2237M.H 359 bytes FLASH Utilities DAP miniWiggler Infineon ULINK2 Keil

Real-Time OS Advanced RTX166 Real-Time Kernel Keil RTX166 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available and is not planned to be implemented by ARM. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (16 channels) Asynchronous/Synchronous Serial Interface ASC0 Capture/Compare Unit CAPCOM1 with T0 and T1 Capture/Compare Unit CAPCOM2 with T7 and T8 (P1H.4-7 Inputs Only) Clock Managment with PLL (Without Decimal Factors) CPU with System Configuration High-Speed Synchronous Serial interface SSC Interrupts NMI PEC Port 0 (2 x 8-bit I/O) Port 1 (2 x 8-bit I/O) Port 2 (16-bit I/O with Open Drain) Port 3 (15-bit I/O with Open Drain) Port 4 (8-bit I/O) Port 5 (16-bit Input) Port 6 (8-bit I/O with Open Drain) Port 7 (8-bit I/O with Open Drain) Port 8 (8-bit I/O with Open Drain) PWM (4 channels) Reset Configuration Timer Block GPT1 (T2, T3, T4) Timer Block GPT2 (T5, T6) Traps Watchdog Timer AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil MON166 Driver Keil