NXP (founded by Philips) P89CV51RD2

The NXP (founded by Philips) P89CV51RD2 is an 8051 based CMOS low power microcontroller with 6-clock mode, 64 kBytes ISP and IAP Flash ROM, 256 Bytes RAM, 768 Bytes XRAM, Dual datapointer, Interrupt system with 4 priority levels and 7 sources, 3 16-Bit Timer, Watchdog Timer (WDT), One Serial Peripheral Interface (SPI), Full duplex UART with Framing error detection und automatic address recognition, Programmable Capture Array (PCA) with PWM and capture/compare functions, 32 I/O Pins, Idle and power down mode.

Development Tools Compiler, Assembler, Linker, Debugger CA51 Compiler Kit Keil PK51 Professional Developer's Kit Keil Data Sheets 80C51 Family Programmer's Guide 185,335 bytes Data Sheet 341,045 bytes Header Files REG51F.H 3,032 bytes Emulators iC1000 PowerEmulator iSystem MetaICE-XF 8051 In-Circuit Emulator Metalink Corporation Device Programmers Dataman 48Pro2C Super Fast Universal ISP Programmer Dataman Programmers Ltd.

Real-Time OS RTX51 Tiny Keil Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. Interrupts 7S/4L (Including External) PCA Timer with Modules Port 0 Port 1 Port 2 Port 3 Power Saving Modes (Idle and Power Down) Serial UART (Enhanced Interface) Timer 0 Timer 1 Timer 2 (Extended Timer 2) Watchdog Timer X2 mode for CPU and each peripheral with Clock Control The following on-chip peripherals are not simulated. Flash with ISP and IAP AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. Proteus VSM Labcenter Electronics 8051 State Machine MEBA I²C Simulation MEBA LCD Simulation (HD44780 Controller) MEBA LED simulation MEBA Signal Generator MEBA AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil ISD51 Driver Keil Keil MON51/FlashMON Driver Keil