NXP (founded by Philips) LPC4074

The NXP (founded by Philips) LPC4074 is an ARM Cortex-M4 core - running at frequencies of up to 120 MHz - Memory Protection Unit (MPU) - Nested Vectored Interrupt Controller (NVIC) - Hardware floating-point unit (not all versions) - Non-maskable Interrupt (NMI) input - JTAG and Serial Wire Debug (SWD) - Embedded Trace Macrocell (ETM) - System tick timer Memory - up to 512 kB on-chip Flash (ISP and IAP capabilities) - up to 96 kB on-chip SRAM includes - up to 4032 byte on-chip EEPROM LCD controller (not all versions) External Memory Controller (EMC) (not all versions) General Purpose DMA controller (GPDMA) Serial interfaces - Quad SPI Flash Interface (SPIFI) - Ethernet MAC with MII/RMII interface (not all versions) - USB 2.0 full-speed dual port device/host/OTG controller (not all versions) - up to 5 UARTs - 3 SSP controllers - I2S (Inter-IC Sound) interface - CAN controller with 2 channels Digital peripherals - SD/MMC memory card interface (not all versions) - Up to 165 General Purpose I/O (GPIO) pins - 4 general purpose timers/counters - Quadrature encoder interface (not all versions) - 2 standard PWM/timer blocks - One motor control PWM - Real-Time Clock (RTC) - Event Recorder - Windowed Watchdog Timer (WWDT) - CRC Engine block Analog peripherals - 12-bit Analog-to-Digital Converter (ADC) - 10-bit Digital-to-Analog Converter (DAC) - 2 analog comparators (not all versions) Power control - 4 reduced power modes (Sleep, Deep-sleep, Power-down, Deep power-down) - Brownout detect with separate threshold - On-chip Power-On Reset (POR). Clock generation - Clock output function that can reflect various clocks - On-chip crystal oscillator (1 MHz to 25 MHz) - 12 MHz Internal RC oscillator (IRC) - on-chip PLL allows CPU operation up to the max. CPU rate - dedicated PLL may be used for USB interface Unique device serial number Functional replacement for LPC23xx/24xx and LPC178x/7x.