STMicroelectronics STM32F313CC

The STMicroelectronics STM32F313CC is a Core - ARM 32-bit Cortex-M4 CPU - 72 MHz max. frequency - FPU (floating-point unit) - MPU (memory protection unit) Operating conditions: - VDD: 1.8V +/- 8% - VDDA voltage range: 1.65 to 3.6 V Memories - 128 to 256 Kbytes of Flash memory - Up to 40 Kbytes of SRAM on data bus with HW parity check - 8 Kbytes of SRAM on instruction bus with HW parity check (CCM) CRC calculation unit Reset and supply management - Low power modes: Sleep and Stop - VBAT supply for RTC and backup registers Clock management - 4 to 32 MHz crystal oscillator - 32 kHz oscillator for RTC with calibration - Internal 8 MHz RC with x 16 PLL option - Internal 40 kHz oscillator Up to 87 fast I/Os - All mappable on external interrupt vectors - Several 5 V-tolerant 12-channel DMA controller up to 4 × ADC 0.20uS (up to 39 chn) - selectable resolution of 12/10/8/6 bits - 0 to 3.6 V conversion range - separate analog supply from 1.8 to 3.6 V Up to 2 12-bit DAC channels - analog supply from 2.4 to 3.6 V 7 fast rail-to-rail analog comparators - analog supply from 1.65 to 3.6 V Up to 4 operational amplifiers (can be used in PGA mode) - terminal accessible with analog supply from 2.4 to 3.6 V Support for up to 23 capacitive sensing keys Up to 13 timers - 32-bit timer, 16-bit timers - 16-bit 6-channel advanced-control timers - 16-bit timer with 2 IC/OCs - 16-bit timers with IC/OC/OCN/PWM - watchdog timers (independent, window) - SysTick timer - 16-bit basic timers to drive the DAC Calendar RTC - Alarm, periodic wakeup from Stop Communication IFs - CAN IF (2.0B Active) - 2 I2C Fast mode plus (1 Mbit/s) with 20 mA current sink - Up to 5 USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) - Up to 3 SPIs, 2 with muxed I2S IF - Infrared Transmitter Serial wire debug, JTAG, Cortex-M4F ETM 96-bit unique ID.