Toshiba TMPM462F15FG

The Toshiba TMPM462F15FG is an ARM Cortex-M4F microprocessor core (r0p1) - Maximum operating frequency : 120MHz - Little-endian - Single-precision floating-point execution unit (FPU) On-chip program and data memory - RAM : 193 Kbytes (Back-up RAM 1 K bytes is included) - ROM : 1536 Kbyte External bus interface (EBIF) - Expandable to 16MB (shared with program and data) - Supports separate/multiplex bus : 8-bit/16-bit width uDMA controller (uDMAC) : 32 channels / 3 units Clock controller (CG) - Clock input from outside sources/external oscillation (8MHz to 16MHz) - Installed 1 unit of Built-in PLL. (4x, 5x, 6x, 8x, 10x, 12x) - Clock gear function: divides high-speed clock into 1/1, 1/2, 1/4, 1/8 or 1/16 Low power consumption function - IDLE, STOP1, STOP2 External interrupt source - External interrupt pin : 16 pins - Non-Maskable interrupt pin (NMI) : 1 pin Input/ output ports (PORT) : 139 pins 16-bit timer (TMRB) : 16 chn - 16-bit interval timer mode - 16-bit PPG output Real time clock (RTC): 1 chn - Clock (hour, minute and second) - Calendar (month, week, date, leap year) Watchdog timer (WDT) : 1 chn Multi purpose timer (MPT) : 2 chn - 16-bit timer mode - IGBT mode Serial channel (SIO/UART) : 10 chn - Selectable either UART or synchronous mode Asynchronous serial communication interface (UART): 2 chn - Data length: 5, 6, 7, 8 bits I2C bus interface (I2C) : 5 chn - Communication rate 100kbps / 400kbps Synchronous Serial interface (SSP) : 3 chn - Communication protocol that includes SPI: 3 types (SPI/SSI/Microwire) 12-bit AD converter (ADC): 1 unit (20 chn) CEC function (CEC) : 1 chn - Transmission and reception per 1 byte. Remote control signal preprocessor (RMC): 2 chn - Can receive up to 72bit data at a time Oscillation frequency detector (OFD) : 1 chn Debug interface - JTAG/SWD/SWV/DATA TRACE (4 bits).