Spansion MB9BF568M

The Spansion MB9BF568M is a 32bit ARM Cortex-M4F Core (r0p1) - Maximum clock frequency 160MHz - FPU built-in - Support DSP instruction Memory: - up to 1024kB Main Flash - 32kB Work Flash - up to 128kB RAM Base Timer: 8 channels(Max.) Watch counter CRC accelerator Multi-function Timer: 2 unit(Max.) - 16-bit free-run timer x3 channels/unit - Input capture x4 channels/unit - Output compare x6 channels/unit - A/D activation compare x6 channels/unit - Waveform generator x3 channels/unit - 16-bit PPG timer x3 channels/unit SD Card Interface: 1 unit QPRC: 2 channels(Max.) Dual Timer: 1 unit Watch dog Timer: 1 channel(SW) + 1 channel(HW) Multi-function Serial Interface: 8 channels(Max.) - Selectable from UART/CSIO/LIN/I2C External Bus Interface Real Time Clock: 1 unit DMA Controller: 8 channels DSTC: 128 channels USB2.0(Function/Host): 1 channel CAN: 2 channel(Max.) External Interrupt Controller Unit - Up to 16 external vectors - One non-maskable interrupt(NMI) 12-bit A/D Converter: Max. 24 channels(3 units) 12-bit D/A Converter: 2 channels(Max.) Low Power Mode Sleep, Timer, RTC, Deep standby RTC, Stop, Deep standby stop General Purpose I/O port MB9BF166M/F167M/F168M: 63(Max.) MB9BF166N/F167N/F168N: 80(Max.) MB9BF166R/F167R/F168R: 100(Max.) Built-in CR Debug - Serial Wire JTAG Debug Port (SWJ-DP) - Embedded Trace Macrocells(ETM) Low Voltage Detector Clock Super Visor Power Supply: 2.7V to 5.5V.