Freescale Semiconductor MK63FN1M0xxx12

The Freescale Semiconductor MK63FN1M0xxx12 is a Performance – Up to 120 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz – Floating point unit Memories and memory interfaces – Up to 1 MB program flash memory on non-FlexMemory devices – Up to 260 KB RAM – Serial programming interface (EzPort) – FlexBus external bus interface Clocks – 3 to 32 MHz crystal oscillator – 32 kHz crystal oscillator – Multi-purpose clock generator – 1 kHz, 32 kHz, and 4 Mhz internal reference clock System peripherals – Multiple low-power modes to provide power optimization based on application requirements – Memory protection unit with multi-master protection – 16-channel DMA controller, supporting up to 63 request sources – External watchdog monitor – Software watchdog – Low-leakage wakeup unit Security and integrity modules – Hardware CRC module to support fast cyclic redundancy checks – Hardware random-number generator – Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms – 128-bit unique identification (ID) number per chip Human-machine interface – General-purpose input/output Analog modules – Two 16-bit SAR ADCs – Two 12-bit DACs – Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input – Voltage reference Timers – Programmable delay block – Two 8-channel motor control/general purpose/PWM timers – Two 2-channel quadrature decoder/general purpose timers – IEEE 1588 timers – Periodic interrupt timers – 16-bit low-power timer – Carrier modulator transmitter – Real-time clock.