Spansion S6E1A11C0A

The Spansion S6E1A11C0A is a 32-bit ARM Cortex-M0+ Core (r0p1) - Maximum operating frequency: 40 MHz - Nested Vectored Interrupt Controller (NVIC) - 24-bit System timer (Sys Tick) Bit Band operation - Compatible with Cortex-M3 bit band operation On-chip Memory - Up to 88 Kbyte Flash - 6 Kbyte SRAM Multi-function Serial Interface (Max 3chn) - Selectable from UART/CSIO/LIN/I2C DMA Controller (2chn) A/D Converter (Max: 8chn) - 12-bit A/D Converter Base Timer (Max: 4chn) - Operation mode: 16-bit PWM, 16-bit PPG, 16/32-bit reload, 16/32-bit PWC General-purpose I/O Port - Up to 37 fast general-purpose I/O ports Dual Timer (32/16-bit Down Counter) Quadrature Position/Revolution Counter (QPRC) Multi-function Timer Real-time Clock (RTC) Watch Counter External Interrupt Controller Unit - Up to 8 external interrupt input pins - Non-maskable interrupt (NMI) input pin Watchdog Timer (2 chn) Clock and Reset - 5 clock sources (2 ext. osc., 2 built-in CR osc, main PLL) - Reset sources: INITX Pins, POR, SW, Watchdog, LVD, CSV Clock Supervisor (CSV) - Ext. OSC clock failure (clock stop) detect - Ext. OSC frequency anomaly detect Low-voltage Detector (LVD) - LVD1: error reporting via interrupt - LVD2: auto-reset operation Low Power Consumption Mode - 4 low power consumption modes (SLEEP, TIMER, RTC, STOP) Peripheral Clock Gating Debug - Serial Wire Debug Port (SW-DP) - Micro Trace Buffer (MTB) Unique ID -41-bit unique value of the device has been set Power Supply - Wide voltage range: VCC = 2.7 V to 5.5 V.