Peripheral Simulation

For Nuvoton W77E058 — Port 4 (4-bit)

Simulation support for this peripheral or feature is comprised of:

• Dialog boxes which display and allow you to change peripheral configuration.

These simulation capabilities are described below.

Parallel Port 4 Dialog

This dialog displays the SFR and pins of Port 4.

• P4: This is the P4 SFR. The HEX value and value of each bit is displayed and may be changed from this dialog.
• Pins: These are the states of the pins on the simulated MCU. When used as outputs, these have the same value as the P4 SFR. When used as inputs (P4.x is 1) you may set the level of the input pin to high (1) or low (0).