Peripheral Simulation

For NXP (founded by Philips) LPC1754 — Pin Connect Block

Simulation support for this peripheral or feature is comprised of:

• Dialog boxes which display and allow you to change peripheral configuration.

These simulation capabilities are described below.

Pin Connect Block Dialog

The Pin Connect Block Dialog allow the user to configure pins P0.0 - P0.31 of the MCU based on functions required. Selecting a pin allows you to change the function for that pin.

Selected Pin

• P0.x (Pin Name) lists the function choices available for the selected pin.

Pin Select

• PINSELx (Pin Selection Registers 0-1) contain the composite bit settings for the 32 Port 0 bits.

Open Drain Mode Control

• PINMODE_ODx (Pin Open Drain Mode Registers) contain the bit settings for those pins configured to open drain mode (pin=1).