Debugging BLINKY

Debug the BLINKY example program following this procedure. The debugged program is ready for the serial output check.

Use the Start/Stop Debug Session toolbar button or the µVision command Debug — Start/Stop Debug Session to connect the debugger to the Keil ULINK Adapter. The CPU stops and connects to the CoreSight debug port of the TSX1001 device. For more details on the debugging features, refer to the µVision User's Guide.

The Peripherals menu allows you to open different dialogs for Peripheral units on the TSX1001 devices. You may view and/or change the state and configuration of on-chip Peripherals using these dialogs.