Hardware Requirements

To use the MCBTSX1001 Evaluation Kit, you need:

• The MCBTSX1001 Evaluation Board.
• A PC with:
• • One USB port for downloading and debugging.
  • Another USB port to provide power to the board.

To download and debug, one of the following:

• A Keil ULINK2 USB-JTAG Adapter fitted with the 10-wire ribbon cable.
• A Keil ULINK-ME USB-JTAG Adapter fitted with the 10-wire ribbon cable.
• A Keil ULINKpro USB-JTAG Adapter fitted with the 10-wire ribbon cable.

Plus:

• 1 USB A-B cable for connecting the ULINK adapter to the PC.
• 1 USB A-B cable to power the MCBTSX1001 board.