Logic Analyzer

Current Logic Analyzer Signals

List the current defined Logic Analyzer signals for the active target. Select a signal with the mouse to modified the attributes.

Add a variable or VTREG for signal recording with New (Insert key). Delete (Delete key) removes a selected signal.
Select a signal name in this list to modify the following settings.

Signal Display

Configures the appearance of a selected signal.

Display Type sets the graphical display output to: Analog, Bit (0 or 1), or State (signal transitions).
Color sets signal display color.
When Hexadecimal Display is enabled signal values are shown as HEX values. When disabled decimal values are shown.

Display Range

Configure the value range of a selected signal for Analog display type with decimal or HEX values.

Display Formula (Signal & Mask) >> Shift

Extract specific bits from a signal value for displaying.

And Mask specifies a AND mask for the value display of a signal.
Shift Right specifies a shift right factor for the value display of a signal.

Export / Import

Store and restore the current Logic Analyzer Setup.

Export Signal Definitions create a file with the current setup of the signal definitions.
Import Signal Definitions restore a signal definition setup from a file.

Kill All

Delete all defined signals for the active target.

Close

Closes the dialog.

For additional information refer to Logic Analyzer Setup.