usbh_ohci_hw_reg_wr

#include <RTL.h>
#include <rl_usb.h>

void usbh_ohci_hw_reg_wr (
  U32 reg_ofs,
  U32 val
);

The usbh_ohci_hw_reg_wr function writes a value to the OHCI USB Host register.

The function is part of the RL-USB Host software stack.

You can modify this function to suit different OHCI controller register interfaces. Change this function if the OHCI controller is used on a chip that does not have yet a low-level driver.

None.

usbh_ohci_hw_delay_ms, usbh_ohci_hw_get_capabilities, usbh_ohci_hw_init, usbh_ohci_hw_irq_en, usbh_ohci_hw_pins_config, usbh_ohci_hw_port_power, usbh_ohci_hw_reg_rd

void usbh_ohci_hw_reg_wr (U32 reg_ofs, U32 val) {
  *((U32 *)(USBH_OHCI_ADR + reg_ofs)) = val;
}